Much of the success of Kuraray Noritake Dental’s adhesive has come off the back of our originally developed MDP monomer (10-Methacryloyloxydecyl dihydrogen phosphate). After applying for a patent for it in 1981, we started using this monomer’s excellent chemical adhesion properties, hydroxyapatite and metals in PANAVIA EX, our first adhesive resin cement, as well as in our CLEARFIL SE BOND adhesive. Through a process of extensive research and development, we have been able to combine our MDP monomer with hydrophilic amide monomers to create rapid bond technology. Our new universal adhesive system CLEARFIL Universal Bond Quick relies on this technology to deliver a lasting bond faster, and easier, than ever. By building on our past successes to deliver better solutions, this new technology embodies what Kuraray Noritake Dental does best—innovate and develop new and improved products.

Dentin bonding

Bonding to a substrate such as dentin can be difficult, as the adhesive needs to be able to penetrate the dentin. For many other adhesives, their reliance on slow monomers means that there is slow penetration of the dentin layer. Rapid bond technology’s use of amide monomers gives CLEARFIL Universal Bond Quick superior hydrophilic properties in comparison to traditional monomers, such as HEMA, which allows it to penetrate the dentin faster and more effectively. By doing so, the time spent waiting between applying the adhesive and proceeding with air-drying is eliminated and a tight and impermeable seal of the cavity is created after light curing. Thanks to rapid bond technology, bonding with CLEARFIL Universal Bond Quick can be performed easily and efficiently with the added assurance of predictable clinical outcomes.

Low water sorption

When it comes to dentin bonding, the level of water sorption in the bond’s organic matrix is a key indicator of long-term success. A high rate of sorption has demonstrated to be a prominent factor in the progressive physical deterioration of bonds, which can lead to secondary caries. Potentially, due to both the high cross-linking properties of the amide monomers used in our rapid bond technology and the use of almost insoluble Ca-MDP salt, CLEARFIL Universal Bond Quick has a low rate of water sorption. As a result, bonds that are created using this adhesive are more stable and resistant to hydrolytic degradation.

Aesthetic bonding

Rapid bond technology does not only provide a basis for bonding excellence. With a thin film layer of 5–10 μm, CLEARFIL Universal Bond Quick’s aesthetic appeal is evident. Through the aforementioned dense crosslinks of its polymer network, rapid bond technology is able to reinforce the stability of this layer and provide resistance to discolouration.

As the engine powering CLEARFIL Universal Bond Quick, rapid bond technology represents the next step for Kuraray Noritake Dental. Finally, faster and more reliable bonding procedures with consistent and durable results are now possible.

In 1978, Kuraray Noritake Dental introduced CLEARFIL BOND SYSTEM F, the first total-etch adhesive system. Through our renowned products such as the CLEARFIL SE BOND self-etching primer and bonding system and the PANAVIA family of adhesive resin cements, the company has continued to develop new solutions based on additional research and development. Continuing its tradition of setting trends in the dental world, Kuraray Noritake Dental is proud to present CLEARFIL Universal Bond Quick, our newest universal dental bonding agent. Delivering a reliable and lasting result instantly upon application, CLEARFIL Universal Bond Quick eliminates waiting time, the need for rubbing and the application of additional layers. Dentists can simply apply and proceed.

CLEARFIL Universal Bond Quick represents an evolution in dental bonding agents. Regardless of the technique used, CLEARFIL Universal Bond Quick guarantees optimal results in minimal time.

The new standard for bonding agents

CLEARFIL Universal Bond Quick offers a one-step adhesive that can be used for total-etching, selective-etching and self-etching. Unlike other universal bonding systems, it is effective on dentin in total-etch mode irrespective of the dentin’s moisture condition and it can adhere to almost all dental substrates, rendering additional primers obsolete. Our customers already praise its bonding ability as “game-changing” and “astounding”. With all of the advantages of a universal bond without any of the downsides, CLEARFIL Universal Bond Quick is the modern dentist’s preferred bonding agent.

Rapid bond technology

CLEARFIL Universal Bond Quick is developed to be less technique-sensitive than other one-step bonding agents on the market, thanks to Kuraray Noritake Dental’s monomer technology. Where other adhesives rely on slow monomers and their relatively slow dentin penetration, CLEARFIL Universal Bond Quick combines our patented MDP monomer with hydrophilic amide monomers, which is scientifically proven to provide stronger and more stable bonds. By doing so, this universal bonding system is able to penetrate the dentin faster and more effectively after curing, ensuring a tight and impervious seal of the cavity. Kuraray Noritake Dental’s rapid bond technology delivers stability and moisture resistance, making restorative procedures easier and more predictable than ever.

CLEARFIL Universal Bond Quick has a thin film layer of 5–10 μm, ensuring that it is resistant to discolouration along the edge of the restoration, thereby promising better aesthetic results. In addition, it offers excellent post-operative comfort for patients, as they do not suffer from sensitivity. With procedural outcomes like these, it becomes clear that CLEARFIL Universal Bond Quick delivers ideal results for both the dentist and the patient.

A clinical case created by Dr. Shoji Kato of Takanawa Dental Office, Japan

PRODUCTS USED IN THIS CLINICAL CASE

KATANA™ Zirconia Multi-Layered Series

Our KATANA™ Zirconia series brings naturalness to all
prosthetics. Make natural veneers and natural full contour
prosthetics out of zirconia. Plus large dentin-like frameworks.
KATANA™ Zirconia UTML is a high translucent disc, which meets
the requirements of highest translucency level for anterior crowns
and veneers. All layers are highly translucent, whereby the color
saturation is reduced in the incisal area. The transparency of the
natural enamel is copied and the abutment shade is absorbed.

KATANA™ Zirconia STML is a multi-layered zirconia disc
where light is transmitted in the incisal area and blocked in
the cervical area. Due to its color and translucency gradient,
more opacity in the cervical area and more translucency in the
incisal area are achieved.

KATANA™ Zirconia ML, the pioneer of zirconia with a
natural color gradient, is made for large dentinal frameworks.
Its natural opacity makes it the ideal base to cover it with
hand-made ceramics. 

PANAVIA™ V5
One Cement. All cement indications. One prime procedure.
Start with priming the tooth using PANAVIA™ V5 Tooth
Primer. Then prime and roughen the prosthetic using
CLEARFIL™ CERAMIC PRIMER PLUS and apply the pre-mixed
cement. PANAVIA™ V5 comes in five aesthetic shades and
the original MDP assures a durable bond. On the tooth and
the prosthetic.

CLEARFIL™ CERAMIC PRIMER PLUS
The universal prosthetic primer for almost all prosthetic surfaces.
It durably bond to ceramics (lithium disilicate, zirconia), hybrid
ceramics, composite resins and metals. The original MDP monomer
bonds to metals and metal-oxides such as zirconia. Silane coupling
agent γ MPS guarantees a strong adhesion to composites, glassceramics
and hybrid ceramics. This perfect mixture of ingredients
will give you long lasting adhesion to virtually all dental materials.

The Dental Tribune Editor's Choice awarded CLEARFIL Universal Bond Quick with the maximum 5 stars and an impressing 98% score.

Consultants’ Comments
• “Perfect viscosity. Ease of use and speed were great.”
• “I love the unit dose - so easy to use, and there was plenty of adhesive
for most procedures in each one.”
• “Great for replacement of silane to prime crowns for cementation with
resin cements - will self-cure with the dual-cured resin.”
• “Loved the fact that it is compatible with dual/self-cured resins and also
love that it can be used in self-cured mode with CLEARFIL DC Activator.
It’s applicable for all bonding procedures.”
• “Great product. A ‘go to’ bonding agent.”

Read the actual Report from The Dental Advisor
 

The Dental Tribune Editor's Choice awarded CLEARFIL Universal Bond Quick with the maximum 5 stars and an impressing 98% score.

Consultants’ Comments
• “Perfect viscosity. Ease of use and speed were great.”
• “I love the unit dose - so easy to use, and there was plenty of adhesive
for most procedures in each one.”
• “Great for replacement of silane to prime crowns for cementation with
resin cements - will self-cure with the dual-cured resin.”
• “Loved the fact that it is compatible with dual/self-cured resins and also
love that it can be used in self-cured mode with CLEARFIL DC Activator.
It’s applicable for all bonding procedures.”
• “Great product. A ‘go to’ bonding agent.”

Read the actual Report from The Dental Advisor
 

Adhesive cementation of high-translucent zirconium oxide restorations

The definitive integration of full ceramic restorations throws up a lot of questions in everyday practice life. Many of these are answered in the “ACTA Report”. The Congress lectures (ACTA Congress) held by Prof. Matthias Kern (Kiel/Germany) and Daniele Rondoni, ZTM (Savona/Italy) have been condensed down to the essentials and presented in a practical manner. The focus is placed on zirconia materials and it’s adhesive, MDP based cementation.  

Until now, the preferred cementation method for dental zirconia was conventional luting. Through the establishment of high-translucent zirconia materials (e.g. KATANA^TM UTML/STML, Kuraray Noritake Dental), however, the standards have changed. The outstanding aesthetic properties of the new zirconias are to be supported through a composite resin cement. In the ACTA Congress held at the ACTA University (Amsterdam/Netherlands,), Prof. Matthias Kern and Daniele Rondoni, ZTM evinced exciting information on the subject. Prof. Kern underlined the significance of the MDP monomer for the reliable adhesive cementation of zirconia restorations. He is convinced that the chemical adhesion can only take place using MDP based resin cements (PANAVIA^TM, Kuraray Noritake Dental). Rondoni presented the advantages and the material properties of the new zirconias.

In the “ACTA Report”, the scientifically founded explanations, which have proven their worth in practice, have been summarised. The reader learns for example which prerequisites are required for adhesive cementation. In addition, valuable preparation and material-relevant processing guidelines are provided. The explanations on the functional method of the adhesive cementation and the MDP monomer are presented in an interesting way. The original MDP monomer was developed in 1981 by Kuraray in order to improve the bond strength on tooth structure and dental metal alloy. Today, MDP monomer (the basis of PANAVIA^TM resin cements) are characterised by their strong adhesion to metal(oxides) incl. zirconia.

PANAVIA^TM V5 is an aesthetic and adhesive resin cement for all cementation indications, based on MDP technology. Prof. Kern published a work on bonding to zirconia ceramic with MDP for the first time in 1998. His well-founded experiences are practically summarised in the “ACTA Report”.

Today sandblasting and MDP is the proven formula to reliable adhesive cementation of zirconia.

The “ACTA Report” is a recommended read for all dentists and dental technicians who have integrated full ceramic restorations into their everyday working lives. Well-founded and practical!    

For more information

Email dental.eu@kuraray.com or phone +49-(0)69-305 85 980

You can read the full report  here.

Adhesive cementation of high-translucent zirconium oxide restorations

The definitive integration of full ceramic restorations throws up a lot of questions in everyday practice life. Many of these are answered in the “ACTA Report”. The Congress lectures (ACTA Congress) held by Prof. Matthias Kern (Kiel/Germany) and Daniele Rondoni, ZTM (Savona/Italy) have been condensed down to the essentials and presented in a practical manner. The focus is placed on zirconia materials and it’s adhesive, MDP based cementation.  

Until now, the preferred cementation method for dental zirconia was conventional luting. Through the establishment of high-translucent zirconia materials (e.g. KATANA^TM UTML/STML, Kuraray Noritake Dental), however, the standards have changed. The outstanding aesthetic properties of the new zirconias are to be supported through a composite resin cement. In the ACTA Congress held at the ACTA University (Amsterdam/Netherlands,), Prof. Matthias Kern and Daniele Rondoni, ZTM evinced exciting information on the subject. Prof. Kern underlined the significance of the MDP monomer for the reliable adhesive cementation of zirconia restorations. He is convinced that the chemical adhesion can only take place using MDP based resin cements (PANAVIA^TM, Kuraray Noritake Dental). Rondoni presented the advantages and the material properties of the new zirconias.

In the “ACTA Report”, the scientifically founded explanations, which have proven their worth in practice, have been summarised. The reader learns for example which prerequisites are required for adhesive cementation. In addition, valuable preparation and material-relevant processing guidelines are provided. The explanations on the functional method of the adhesive cementation and the MDP monomer are presented in an interesting way. The original MDP monomer was developed in 1981 by Kuraray in order to improve the bond strength on tooth structure and dental metal alloy. Today, MDP monomer (the basis of PANAVIA^TM resin cements) are characterised by their strong adhesion to metal(oxides) incl. zirconia.

PANAVIA^TM V5 is an aesthetic and adhesive resin cement for all cementation indications, based on MDP technology. Prof. Kern published a work on bonding to zirconia ceramic with MDP for the first time in 1998. His well-founded experiences are practically summarised in the “ACTA Report”.

Today sandblasting and MDP is the proven formula to reliable adhesive cementation of zirconia.

The “ACTA Report” is a recommended read for all dentists and dental technicians who have integrated full ceramic restorations into their everyday working lives. Well-founded and practical!    

For more information

Email dental.eu@kuraray.com or phone +49-(0)69-305 85 980

You can read the full report  here.

Our latest "BOND" newsletter is now published and ready to read!

Content Highlights

CLEARFIL™ Universal Bond Quick
The development of one step self-etch

New Zirconia KATANA™
Digital Concept

Read BOND volume 2